Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Pembroke Park
Sliding and patio door replacement in Pembroke Park, FL runs $1,800-$4,200 for a standard impact-rated unit, with most jobs completed in one day after the measured survey. Every opening in Pembroke Park sits in Florida’s High-Velocity Hurricane Zone, so the door you install must carry a current Miami-Dade Notice of Acceptance - and if your home sits in one of the town’s mobile home communities, the unit also needs HUD-compliant labeling that park managers verify before the install truck enters the gate. Call (786) 685-4706 to schedule your free measured survey; we’ll bring the written price when we arrive, and it won’t change.
We serve Pembroke Park from our Miami office, with crews running daily routes through the corridor between Hallandale Beach Boulevard and Pembroke Road. Whether you’re in a 1960s CBS home off Southwest 52nd Avenue or a manufactured home in Lake Villa, we know which permit path applies and which product labeling the inspector - or the park manager - will ask to see.
Why Sightline Windows & Doors West Park Is Pembroke Park’s Preferred Sliding & Patio Doors Company
We’ve installed and replaced sliding and patio doors across Pembroke Park since adding the route to our South Florida coverage, and the pattern is consistent: homeowners here face a compliance landscape that doesn’t match Hollywood or Hallandale Beach, even though those cities sit just minutes away. The split between older CBS construction and manufactured housing means two different code tracks, two different product labeling requirements, and two different inspection paths. Contractors who treat every Pembroke Park job the same way end up red-tagged or turned away at the park gate.
Our Sliding & Patio Doors team documents every measured survey with photos, frame readings, and a written scope the customer keeps. The quote we generate from that survey is the final invoice - Haven Clause 1, in writing from the start. Our crews are background-checked, uniformed, and identified by license number before arrival, per Haven Clause 3. Every completed job carries the 365-Day Done Right Promise and leaves a documented photo record. Live phone coverage is available 24/7 at (786) 685-4706.
Pembroke Park customers have used our Free Second Opinion on Any Written Estimate to compare competitor quotes that missed the HUD labeling requirement or specified non-impact doors without a current NOA. Those oversights don’t surface until inspection, or until the wind mitigation form is rejected. We catch them before the deposit is paid.
Our Sliding & Patio Doors Services in Pembroke Park

Patio Doors
New patio door installation in Pembroke Park starts with a measured survey of the rough opening, the wall assembly, and the exposure direction. For CBS homes built between the 1950s and 1970s, we often find non-standard rough openings that require custom framing or a made-to-order unit rather than a stock size. We specify from our eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - by what the opening requires, not by what is in stock. The written price names the exact unit, the installation method, and the permit type before any work starts.

Impact Sliding Glass Doors
Every impact sliding glass door we install in Pembroke Park carries a current Miami-Dade NOA and meets the HVHZ design pressure requirement for this address. We see a lot of original single-pane aluminum sliders in the older CBS homes near Hallandale Beach Boulevard that have corroded tracks from salt-laden air - the door jumps, the seal fails, and the laminated interlayer degrades years before the glass cracks. Our replacement units use impact-rated laminated glass with a warm-edge spacer and a frame system rated for the DP-50+ pressures this zone requires. We pull the permit, pass the inspection, and provide the wind mitigation documentation your insurer needs to credit the opening under Florida Statute 627.0629.

Sliding Glass Door Replacement
Sliding glass door replacement in Pembroke Park’s manufactured home communities follows a different path. We were called to a home in the Lake Villa mobile home community off Pembroke Road where the original aluminum sliding glass door had lost its seal and was fogging between the panes. The park manager required us to show HUD labeling on the replacement unit before we could even bring it on site, so we spec’d a PGT impact sliding glass door with the compliance label intact and pulled the correct HUD-path permit rather than a standard FBC residential permit. After install, the homeowner used the wind mitigation documentation we provided to pursue the windstorm insurance credit under Florida Statute 627.0629. If you’re in a Pembroke Park mobile home park, the door must carry that HUD label - we verify it before we quote.

Impact French Patio Doors
Impact French patio doors in Pembroke Park combine the aesthetic of hinged door pairs with the HVHZ performance this address requires. We install Therma-Tru and PGT impact-rated French door systems with multi-point locking hardware and laminated glass that meets the NOA for this wind zone. On older CBS homes, we often need to reframe the opening to accommodate the deeper jamb and reinforced hinge mounting that impact-rated French doors require. The measured survey documents the existing rough opening, the wall thickness, and the structural attachment points; the written quote names the exact reframing scope and the finished price.

Screen Door Installation
Screen door installation in Pembroke Park pairs with new or existing sliding and patio door systems. We specify screen doors that match the frame finish and roller system of the primary door, with mesh options from standard fiberglass to pet-resistant and solar-blocking grades. On manufactured homes, the screen door must also meet HUD anchoring requirements if it’s part of the primary egress system.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Pembroke Park
We draw from eight verified manufacturer lines for Sliding & Patio Doors in Pembroke Park: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For the salt-air corrosion common near Pembroke Park’s eastern edge, we often specify ES Windows or ECO Window Systems aluminum frames with a 70-mil or thicker wall section and a Kynar-based finish rated for marine exposure. Therma-Tru supplies our impact-rated fiberglass French door systems. Mr-Glass provides custom laminated glass configurations when the standard impact lite doesn’t fit a non-standard rough opening. We don’t stock inventory and push what’s on the truck - we measure, specify by performance tier and price range, and order the unit that matches the opening and the code path.
Common Sliding & Patio Doors Problems We See in Pembroke Park Homes

- Corroded aluminum tracks and failed seals in CBS homes. The salt-laden air that reaches Pembroke Park from the Atlantic, just a few miles east, pits and oxidizes the original single-pane aluminum slider tracks in 1950s-1970s homes. The door jumps the track. The laminated glass interlayer fails at the seal edge. The unit looks intact but no longer seals against wind or water. We replace with an impact-rated system and a stainless or coated track assembly.
- Non-impact doors sold as “hurricane-rated” without a current NOA. Cheap sliding doors marketed with vague impact claims fail the HVHZ design pressure requirement for this address. The homeowner discovers the problem when the wind mitigation inspection rejects the opening, or worse, when the door fails in a storm. We verify the NOA number, the expiration date, and the design pressure rating before we quote.
- Wrong permit path in manufactured home parks. Contractors who pull a standard Florida Building Code residential permit in a Pembroke Park mobile home park get red-tagged at inspection because the door lacks the required HUD labeling and anchoring method for manufactured housing. The job stalls. The permit must be re-pulled under the correct HUD path, often with a different product. We identify the correct path during the measured survey and quote only compliant units.
- Fogged insulated glass from failed warm-edge seals. Original dual-pane sliders in 1980s and 1990s additions lose their argon fill and fog between the lites. The glass is intact but the thermal and structural performance is gone. We replace with impact-rated laminated insulated glass that carries a current NOA and meets the HVHZ requirement.
Pricing for Sliding & Patio Doors in Pembroke Park, FL
A typical impact sliding glass door replacement in Pembroke Park runs $1,800-$3,400 for a standard 6-foot opening, $2,800-$4,200 for an 8-foot multi-slide or a French patio door system. Manufactured home installations with HUD-compliant units and the additional anchoring hardware fall in the $2,200-$3,800 range. Custom sizes for non-standard rough openings in older CBS homes add $400-$900 for made-to-order framing.
What moves the price: the frame material (vinyl, aluminum, or fiberglass), the glass package (impact-rated laminated, impact with Low-E and argon, or custom tint), the hardware grade, and the reframing scope if the rough opening doesn’t match a standard unit. Reputable brands with current NOAs - PGT, CGI, ES Windows - cost more than non-compliant or expired-NOA products because they carry the documentation your insurer and inspector require.
Our measured survey is free. The written quote we leave with you is the final price - Haven Clause 1. No change orders. Call (786) 685-4706 to schedule.
We Also Serve Cities Near Pembroke Park

Our crews run daily routes through West Park, Hollywood, Miami Gardens, and North Miami, with dispatch coordinated from our Miami office. Each city has its own inspection jurisdiction and wind-load requirements, and we maintain current permit paths for all four. If you’re near the Pembroke Park border in any of these cities, the same measured survey process and written-price guarantee apply.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pembroke Park

Yes. Manufactured home communities in Pembroke Park require HUD-labeled patio door units with manufacturer compliance markings on the door itself, and park managers typically verify this labeling before allowing the install truck on site. A standard Florida Building Code residential permit and a Miami-Dade NOA alone are not sufficient. We spec HUD-compliant impact sliding glass doors from PGT and pull the correct HUD-path permit. Call (786) 685-4706 and we’ll confirm your park’s specific requirements during the free measured survey.
Yes. All of Broward County, including Pembroke Park, falls within Florida’s High-Velocity Hurricane Zone. Every replacement exterior door must carry a current Miami-Dade Notice of Acceptance. Distance from the coastline does not exempt this address; the HVHZ boundary is county-wide. We verify the NOA number and expiration date on every unit we specify. Call (786) 685-4706 for a quote that names the exact NOA-backed product.
It can, if the door meets the qualifying criteria under Florida Statute 627.0629 and your insurer participates in the wind mitigation credit program. The door must carry a current Miami-Dade NOA, be properly installed, and pass inspection. We provide the wind mitigation documentation - the product NOA, the installation photos, and the passed inspection record - that you or your agent submit to the insurer. The credit varies by carrier and policy. Call (786) 685-4706 and we’ll review whether your specific opening qualifies.
Check your property deed or ask your community manager if you pay lot rent. Site-built CBS homes in Pembroke Park follow the standard Florida Building Code residential permit path with a Broward County inspection. Manufactured homes in communities like Lake Villa off Pembroke Road follow the HUD installation guidelines with HUD-labeled products and often a park-managed approval step before the county inspection. We determine the correct track during our measured survey and quote only compliant products. Call (786) 685-4706 to schedule.
Usually, but it requires a precise measured survey. Homes built from the 1950s through the 1970s in Pembroke Park often have non-standard rough openings that don’t match today’s stock unit dimensions. We document the exact width, height, wall thickness, and structural attachment points during the survey, then specify a made-to-order impact slider or a custom reframing scope to fit a standard unit. The written quote names the exact approach and the finished price. Call (786) 685-4706 for the measured survey.
Ready for your free measured survey? Call (786) 685-4706. We’ll bring the written price, verify your permit path, and spec the exact impact-rated sliding or patio door your Pembroke Park opening requires - with the documentation your inspector, your park manager, and your insurer will ask to see.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Pembroke Park under the Haven Standard since 2012.










Before
After
Before
After
Before
After