Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Fort Lauderdale, FL
Window installation in Fort Lauderdale requires products carrying a Miami-Dade NOA or HVHZ-specific Florida Product Approval, because the entire city sits inside Florida’s High-Velocity Hurricane Zone. We install and replace windows and doors under these exacting standards, drawing from eight manufacturer lines including PGT, CGI, and ES Windows, with a written price before any work starts and a documented photo record when the job is done. Call (786) 685-4706 to schedule your free measured survey.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale’s residential core is dominated by mid-century concrete block construction from the 1950s through the 1970s, particularly in Victoria Park, Coral Ridge, and Rio Vista. Many of these homes still carry original single-pane aluminum or jalousie windows that are both hurricane non-compliant and deeply energy-inefficient. The city’s 165-plus miles of inland waterways mean a disproportionate share of properties are canal-front, where brackish water vapor and salt air accelerate frame corrosion and seal failure faster than non-waterfront homes experience.
The HVHZ designation here reflects extreme design wind speeds for Southeast Atlantic coastal exposure, mandating products tested under TAS 201/202/203 protocols, the most rigorous in the country. Year-round high humidity, intense UV, and salt-laden air off both the Atlantic and the Intracoastal Waterway degrade glazing compounds, frame finishes, and non-marine-grade hardware far faster than in Central or North Florida. Fort Lauderdale permit inspectors routinely reject installations where the contractor pulled a standard Florida Product Approval rather than a confirmed HVHZ-listed approval, a distinction many out-of-market contractors miss, resulting in failed inspections and required tear-outs at the contractor’s cost. Broward County insurers aggressively offer wind mitigation premium discounts, making impact-rated replacement the legal and financial baseline for Fort Lauderdale homeowners.
Our Main Fort Lauderdale Services
The two services Fort Lauderdale homeowners call about most are window replacement and impact-rated installations, followed closely by sliding and patio door upgrades for indoor-outdoor living.
Window Replacement in Fort Lauderdale
We replace original single-pane aluminum and jalousie windows in Fort Lauderdale’s mid-century concrete block homes with HVHZ-compliant products that carry confirmed Miami-Dade NOA approval. Every replacement begins with a measured survey the customer keeps, and the written quote cannot differ from that document. We specify products from PGT, CGI, CWS, and ES Windows by what the opening requires, not by what is in stock. Window Replacement in Fort Lauderdale
Impact Windows & Doors in Fort Lauderdale
Impact-rated window and door replacement is the legal baseline in Fort Lauderdale, not a luxury upgrade, because every product must meet HVHZ-specific approval. We install laminated glass and reinforced frame systems tested under TAS 201/202/203, with wind mitigation documentation provided for insurance discount submission. The measured survey, written price, and final invoice are the same document, stamped under the Haven Standard. Impact Windows & Doors in Fort Lauderdale
Sliding & Patio Doors in Fort Lauderdale
Sliding and patio door replacement in Fort Lauderdale must satisfy the same HVHZ requirements as windows, with the added challenge of large glass spans and multi-panel track systems exposed to salt air. We install impact-rated sliding, folding, and multi-slide systems from PGT, CGI, and ViewLux, with marine-grade hardware specified for canal-front and ocean-adjacent properties. The written scope includes frame readings, sightline measurements, and product specs the customer reviews before work begins. Sliding & Patio Doors in Fort Lauderdale
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Fort Lauderdale
Window installation in Fort Lauderdale means working within the High-Velocity Hurricane Zone, where every product must carry a Miami-Dade NOA or HVHZ-specific Florida Product Approval, and where the 1950s-1970s concrete block housing stock in neighborhoods like Victoria Park and Coral Ridge still contains original single-pane aluminum windows that are both non-compliant and thermally poor. We approach Window Installation with a measured survey the customer keeps, a written price before any tool is lifted, and a documented photo record when the job is finished.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum frames rattle in wind, show corrosion at the sill, or no longer lock securely, common in Rio Vista and Coral Ridge homes built before 1980.
What it costs in Fort Lauderdale
Single and double hung window installation in Fort Lauderdale typically ranges from $650 to $1,200 per opening for HVHZ-compliant vinyl or aluminum systems, with impact-rated laminated glass adding 25-40% over standard replacement.
How we do it
We measure rough opening to finished frame dimensions, specify the NOA-listed product by performance tier, remove the existing unit without damaging the concrete block surround, install the new window with HVHZ-approved anchoring and sealant, and document the completed installation with dated photographs.
Horizontal Roller Windows
Signs you need it
Roller mechanisms grind, stick, or require shoulder force to operate, and the track shows pitting from salt air exposure, particularly on canal-front properties in Las Olas Isles.
What it costs in Fort Lauderdale
Horizontal roller window installation in Fort Lauderdale typically ranges from $750 to $1,350 per opening for impact-rated systems with stainless steel rollers and marine-grade hardware.
How we do it
We record the existing track profile and sash weight, specify a replacement unit with upgraded roller capacity and weep drainage suited to Fort Lauderdale’s driving rain exposure, install with continuous sill pan flashing, and verify smooth operation before the customer signs the completion record.
What Window Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Single/Double Hung Window (non-impact vinyl) | $650 - $950 per opening |
| Single/Double Hung Window (impact-rated) | $900 - $1,400 per opening |
| Horizontal Roller Window (impact-rated) | $750 - $1,350 per opening |
Do you pull permits for window installation in Fort Lauderdale?
Yes, we pull the permit and schedule inspection for every window installation in Fort Lauderdale, and we verify HVHZ-listed approval on the product label before ordering, because standard Florida Product Approvals are rejected by Broward County inspectors. Call (786) 685-4706 for your free measured survey.
Will the price change once window installation starts?
No, the written quote from your measured survey is the final price, because Haven Clause 1 states that the measurement and the quote are the same document, and we do not issue change orders for conditions visible at survey. Call (786) 685-4706 to schedule.
Door Installation in Fort Lauderdale
Door installation in Fort Lauderdale requires the same HVHZ compliance as windows, with the added complexity of large glass lites, multi-point locking, and the security expectations that come with a primary entry point. The mid-century concrete block homes in Victoria Park and Coral Ridge often retain original hollow-core or thin-gauge metal doors that are both hurricane non-compliant and thermally poor, while canal-front properties need marine-grade hardware to resist salt-air corrosion. We approach Door Installation with a measured survey, written price, and documented completion record under the Haven Standard.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows daylight around the frame, the deadbolt no longer seats flush, or the glass lite is single-pane and unlabeled, common in Rio Vista homes with original 1960s entries.
What it costs in Fort Lauderdale
Hurricane-proof front and entry door installation in Fort Lauderdale typically ranges from $2,800 to $5,500 for a full pre-hung impact-rated system with multi-point lock and HVHZ-approved jamb anchoring.
How we do it
We measure the rough opening and existing jamb depth, specify a pre-hung unit from Therma-Tru or CGI with laminated glass and stainless steel multi-point hardware, remove the old door without damaging the concrete block return, install with HVHZ-approved fasteners and sealant, and document with dated photographs.
French & Double Doors
Signs you need it
French door panels no longer align at the meeting stile, weatherstripping is compressed or missing, or the inactive panel shows frame separation from salt-air degradation.
What it costs in Fort Lauderdale
French and double door installation in Fort Lauderdale typically ranges from $4,200 to $8,500 for impact-rated pairs with laminated glass, multi-point locks, and adjustable hinges suited to the opening’s settled condition.
How we do it
We assess the header condition and sill level, specify a pair with adjustable hinge barrels and compression weatherstripping rated for HVHZ pressure cycling, install with continuous sill pan and head flashing, adjust for uniform compression, and record the final sightline and lock engagement.
What Door Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hurricane-Proof Front/Entry Door | $2,800 - $5,500 |
| French & Double Doors (impact-rated pair) | $4,200 - $8,500 |
| Standard Replacement Door (non-impact, interior) | $800 - $1,800 |
Do you pull permits for door installation in Fort Lauderdale?
Yes, we pull the permit and schedule inspection for every exterior door installation, and we verify the product carries a Miami-Dade NOA or HVHZ-specific Florida Product Approval before ordering materials. Call (786) 685-4706 for your free measured survey.
How long does door installation take in Fort Lauderdale?
Most single entry door installations complete in one day, French and double door systems in one to two days, assuming the rough opening is sound and the HVHZ-approved product is in stock. Call (786) 685-4706 to schedule your survey and written quote.
Energy-Efficient Windows in Fort Lauderdale
Energy-efficient window replacement in Fort Lauderdale addresses the specific thermal burden of mid-century concrete block homes with original single-pane aluminum windows, where cooling costs run high year-round and UV degradation accelerates interior fading. The combination of intense subtropical sun, high humidity, and salt-air exposure means glazing performance matters as much as impact resistance here. We approach Energy-Efficient Windows with a measured survey that records existing U-factor and SHGC performance, a written specification of improvement targets, and a documented photo record of completion.
Low-E & Argon Gas Glass
Signs you need it
Rooms with western or southern exposure stay uncomfortably warm despite air conditioning, or flooring and furnishings near windows show fading, common in Coral Ridge and Rio Vista homes with uncoated single-pane glass.
What it costs in Fort Lauderdale
Low-E and argon gas glass installation in Fort Lauderdale typically ranges from $750 to $1,400 per opening for double-pane units with soft-coat Low-E on surface #2 and argon fill, in impact-rated configurations.
How we do it
We measure the visible transmittance needs and solar heat gain coefficient target, specify a double-pane unit with Low-E coating and argon fill from ECO Window Systems or ES Windows, install with warm-edge spacer and HVHZ-approved anchoring, and provide the performance label documentation for your records.
Insulated Laminated Glass
Signs you need it
You want impact protection and thermal improvement in one unit, or your existing laminated glass is single-pane and transmits excessive heat, typical of early impact installations in Victoria Park.
What it costs in Fort Lauderdale
Insulated laminated glass installation in Fort Lauderdale typically ranges from $950 to $1,650 per opening for triple-layer units with laminated outboard lite, Low-E coating, and argon-filled air space.
How we do it
We specify the laminated configuration by threat level and thermal target, order from a manufacturer with confirmed HVHZ approval for the exact make and model, install with structural silicone glazing tape and mechanical fasteners per the NOA, and record the unit label and installation detail.
What Energy-Efficient Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Low-E & Argon Gas Glass (double-pane, impact-rated) | $750 - $1,400 per opening |
| Insulated Laminated Glass (triple-layer, impact-rated) | $950 - $1,650 per opening |
| ENERGY STAR Replacement Window (full unit) | $850 - $1,500 per opening |
Will energy-efficient windows lower my cooling costs in Fort Lauderdale?
Yes, replacing single-pane aluminum windows with Low-E, argon-filled units typically reduces solar heat gain by 50-70%, which in Fort Lauderdale’s year-round cooling climate translates to measurable utility reduction; we document the before-and-after performance specs on your completion record. Call (786) 685-4706 for a free measured survey.
Do energy-efficient windows still meet hurricane codes in Fort Lauderdale?
Yes, all energy-efficient windows we install in Fort Lauderdale carry the same Miami-Dade NOA or HVHZ-specific Florida Product Approval as standard impact products, because the thermal coatings and gas fills are applied within impact-rated laminated and insulated configurations. Call (786) 685-4706 to review the options.
Impact Garage Doors in Fort Lauderdale
Impact garage door replacement in Fort Lauderdale is governed by the same HVHZ requirements as windows and entry doors, with the added challenge of large surface areas and wind-borne debris impact at the largest opening in most homes. Mid-century concrete block construction in neighborhoods like Victoria Park and Coral Ridge often retains original non-rated garage doors that fail both structurally and cosmetically under salt-air exposure. We approach Impact Garage Doors with a measured survey of the opening and header condition, a written specification of wind-load rating and impact resistance, and documented completion under the Haven Standard.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, shows corrosion at the bottom section from canal-front moisture, or rattles excessively in moderate winds, common in Las Olas Isles and Rio Vista.
What it costs in Fort Lauderdale
Hurricane-rated garage door installation in Fort Lauderdale typically ranges from $3,200 to $6,800 for a complete system including impact-rated sections, reinforced track, and heavy-duty spring assembly rated for HVHZ design pressures.
How we do it
We measure the opening width, height, and headroom, calculate the design wind pressure per ASCE 7 for Fort Lauderdale’s exposure category, specify a door and track system with confirmed HVHZ approval, remove the old door and hardware, install the new system with reinforced struts and upgraded spring cycle rating, and test balance and auto-reverse before documentation.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient wind-load documentation, or your insurance inspector flagged the garage door as non-compliant, increasingly common in Broward County wind mitigation reviews.
What it costs in Fort Lauderdale
Wind-load code compliance upgrades for existing garage doors in Fort Lauderdale typically range from $1,800 to $3,500 for reinforcement kits, upgraded track, and engineering documentation, or $3,200 to $6,800 for full replacement with a rated system.
How we do it
We review the existing door’s construction and the permit or insurance requirement, specify either a reinforcement package with engineer-signed calculations or a full replacement with HVHZ-listed product, install per the manufacturer’s NOA, and provide the documentation package for permit closure or insurance submission.
What Impact Garage Doors Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hurricane-Rated Garage Door (complete system) | $3,200 - $6,800 |
| Wind-Load Compliance Upgrade (reinforcement kit) | $1,800 - $3,500 |
| Energy-Efficient Garage Door (insulated, impact-rated) | $3,800 - $7,200 |
Do I need a permit to replace my garage door in Fort Lauderdale?
Yes, garage door replacement in Fort Lauderdale requires a building permit because the door is a structural component in the HVHZ, and we pull the permit, provide HVHZ product approval documentation, and schedule inspection as standard. Call (786) 685-4706 for your free measured survey.
Can I keep my garage door opener with a new impact-rated door?
Most standard openers can be retained if the new door’s weight and spring-assisted balance fall within the opener’s rated capacity, though we verify compatibility during survey and note any required upgrade on the written quote. Call (786) 685-4706 to schedule.
Custom & Geometric Windows in Fort Lauderdale
Custom and geometric window installation in Fort Lauderdale presents the unique challenge of fitting non-rectangular and oversized openings with products that still carry Miami-Dade NOA or HVHZ-specific Florida Product Approval, in a market where many custom shapes are available only in standard-product-approval versions that cannot be legally installed here. The mid-century and contemporary homes in Coral Ridge, Rio Vista, and Las Olas Isles often feature arched, circular, or grouped geometric openings that define the architecture. We approach Custom & Geometric Windows with a full-size template or digital measurement, a written specification of the exact shape and performance, and documented completion with photo record.
Geometric & Shaped Windows
Signs you need it
Your circular, octagonal, or trapezoidal window leaks, shows seal failure at the curved edge, or is single-pane and non-compliant, common in 1960s-1970s modernist homes in Coral Ridge.
What it costs in Fort Lauderdale
Geometric and shaped window installation in Fort Lauderdale typically ranges from $1,400 to $3,200 per opening for custom-sized impact-rated units with laminated glass and marine-grade frame, depending on complexity and whether a radius template is required.
How we do it
We create a full-size template or 3D scan of the existing opening, submit to the manufacturer with HVHZ approval verification for the exact configuration, receive the custom unit with laminated glass and reinforced frame, install with flexible flashing compatible with the curved or angled surround, and document the finished sightline.
Oversized Openings
Signs you need it
Your picture window or grouped window wall spans more than 48 inches in any dimension, shows deflection or seal failure at the center, or was installed before HVHZ requirements and carries no approval documentation.
What it costs in Fort Lauderdale
Oversized opening window installation in Fort Lauderdale typically ranges from $2,800 to $7,500 per opening for custom-engineered impact-rated units with reinforced frames, multiple laminated lites, and structural silicone glazing, depending on span and design pressure.
How we do it
We measure the rough opening and assess the structural support condition, engage the manufacturer’s engineer for a custom HVHZ submittal if the size exceeds standard NOA limits, install with supplemental anchoring per the engineer’s detail, and provide the approval package and photo record for permit closure.
What Custom & Geometric Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Geometric & Shaped Window (custom, impact-rated) | $1,400 - $3,200 per opening |
| Oversized Opening (custom-engineered, impact-rated) | $2,800 - $7,500 per opening |
| Arched & Curved Window (custom, impact-rated) | $1,800 - $3,800 per opening |
Can any shape be made impact-rated for Fort Lauderdale?
Most common geometric shapes can be fabricated in HVHZ-approved configurations, though extreme aspect ratios or very large radii may require custom engineering submittal, which we handle with the manufacturer and include in the written quote. Call (786) 685-4706 to discuss your opening.
How long do custom windows take to manufacture for Fort Lauderdale?
Custom geometric and oversized windows typically require 8-14 weeks from template approval to delivery, depending on the manufacturer’s current HVHZ-certified production schedule, and we provide a written timeline with your quote that does not change once confirmed. Call (786) 685-4706 to start the measured survey.
Brands We Service in Fort Lauderdale
We install and service eight manufacturer lines in Fort Lauderdale: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for ES Windows, ECO Window Systems, and Therma-Tru are stocked locally through our Miami (South FL) office, with most hardware and seal orders available within 48 hours. our brands
Pricing for Windows & Doors in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Single/Double Hung Window (non-impact vinyl) | $650 - $950 per opening |
| Single/Double Hung Window (impact-rated) | $900 - $1,400 per opening |
| Horizontal Roller Window (impact-rated) | $750 - $1,350 per opening |
| Hurricane-Proof Front/Entry Door | $2,800 - $5,500 |
| French & Double Doors (impact-rated pair) | $4,200 - $8,500 |
| Low-E & Argon Gas Glass (impact-rated) | $750 - $1,400 per opening |
| Insulated Laminated Glass (impact-rated) | $950 - $1,650 per opening |
| Hurricane-Rated Garage Door (complete) | $3,200 - $6,800 |
| Wind-Load Compliance Upgrade | $1,800 - $3,500 |
| Geometric & Shaped Window (custom) | $1,400 - $3,200 per opening |
| Oversized Opening (custom-engineered) | $2,800 - $7,500 per opening |
Prices in Fort Lauderdale push toward the higher end when existing concrete block returns require repair, when canal-front properties need marine-grade hardware upgrades, or when custom engineering submittals are required for oversized or geometric shapes. The written quote from your measured survey is the final price, because Haven Clause 1 states that the measurement and the quote are the same document.
Neighborhoods We Serve in Fort Lauderdale
We install and replace windows and doors across Fort Lauderdale’s established residential neighborhoods, from the mid-century concrete block homes of Victoria Park and Coral Ridge to the canal-front properties of Rio Vista and Las Olas Isles. Crews are dispatched from our Miami (South FL) office and typically arrive within scheduled windows for the Fort Lauderdale metro area.
- Victoria Park
- Coral Ridge
- Rio Vista
- Las Olas Isles
- Tarpon River
Service Area - Cities Near Fort Lauderdale
Our crews serve the broader Broward and northern Miami-Dade county area from our Miami (South FL) office, with scheduled appointments available in Plantation, FL, Hollywood, FL, Miami Gardens, FL, and Pembroke Pines, FL. Every appointment receives the same Haven Standard: measured survey, written price before work starts, verified crew, and documented photo record on completion.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Lauderdale
We answer calls with a live person 24/7 and typically schedule measured surveys within a few business days for the Fort Lauderdale area, with installation timing depending on product availability and permit status; we do not promise same-day installation for planned work, because Haven Clause 1 requires a measured survey and written quote before any tool is lifted.
Many Fort Lauderdale neighborhoods with active HOAs, particularly in Coral Ridge and Las Olas Isles, require architectural review before exterior changes; we provide product cut sheets, color samples, and NOA documentation to support your application, and we do not start work until both HOA and municipal approvals are in hand.
If an installation fails inspection due to our error, including HVHZ approval documentation or installation detail, we correct the deficiency at our cost under the 365-Day Done Right Promise; in Fort Lauderdale, the most common avoidable failure is a contractor’s use of standard Florida Product Approval instead of confirmed HVHZ-listed approval, which we verify before ordering.
Call (786) 685-4706 to schedule your free measured survey and written estimate. Every engagement begins with a survey you keep, and the written quote cannot differ from that document.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.