Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Replacement: The West Park Owner’s Guide
Mr-Glass window replacement in West Park typically runs $340-$780 per opening installed, depending on whether you’re swapping a standard single-hung or stepping up to impact-rated laminated glass. We stock Mr-Glass-compatible sashes, balances, and complete frame assemblies for same-day installation on most residential series. Homeowners usually notice the problem first as a window that won’t stay open, visible moisture between panes, or a frame that has visibly shifted in its opening after a storm.
Which Mr-Glass Models This Applies To
Mr-Glass manufactures across several residential series, and the part you need depends on the age of your install and the original specification. The MG-100 and MG-200 single-hung series are the most common in West Park homes built between 2015 and 2020, particularly the subdivisions near Sunview Park where these were specified as builder-grade options. The MG-Impact line uses a thicker laminated pane with a reinforced frame profile that is not interchangeable with standard series sashes.
To identify your exact model, check the etched mark in the lower corner of the glass (usually the interior face) or the sticker on the frame header, which lists the NFRC rating and series code. The critical compatibility gotcha: MG-200 balances from 2016-2018 production use a 5/8-inch pivot bar that differs from the 1/2-inch bar used from 2019 forward. Ordering the wrong balance means a second trip and a window that still won’t operate. We carry both specs on our trucks.
For OEM versus aftermarket, Mr-Glass does not sell direct to homeowners, and their distribution network in South Florida is limited. We source factory-spec replacement sashes and hardware through verified distributors, and where OEM lead times exceed five business days, we use aftermarket equivalents that match the original U-factor and SHGC ratings. The glazing specification is what matters, not the logo on the box.
Signs Your Mr-Glass Window Replacement Is Failing

- The sash drops or won’t stay raised. This points to failed coil balances or broken pivot bars, common in West Park’s salt-air environment where the metal fatigue accelerates after seven to ten years of exposure. The balance spring loses tension gradually, so owners often compensate by propping the sash with a stick before calling.
- Fog or moisture visible between the glass panes. The insulated glass unit (IGU) seal has failed, allowing humid Florida air to enter the airspace. Once the desiccant inside the spacer bar saturates, the fogging becomes permanent and the thermal performance of the window drops measurably.
- Frame corner separation or visible bowing. Heat expansion and contraction stress the vinyl or aluminum frame joints; in West Park’s unshaded exposures, dark-frame units can reach surface temperatures exceeding 140°F. The frame loses its square, and the sash no longer seats properly against the weatherstrip.
- Cracked or shattered glass with the inner pane intact. In impact-rated Mr-Glass units, the outer lite is designed to break while the laminated interlayer holds. This is a successful impact test result, not a total window failure, but the sash must still be replaced to restore the design pressure rating.
- Air infiltration or water intrusion at the sill. The weep system is clogged with debris, or the sill flashing was compromised during original installation. In West Park’s afternoon thunderstorms, a blocked weep channel forces water into the wall cavity instead of draining to the exterior.
Before
AfterReplacement Cost & What’s Included
Our installed pricing for Mr-Glass window replacement in West Park follows Haven Clause 1: the measured survey and the written quote are the same document.
| Scope | Price Range (Installed) |
|---|---|
| Standard single-hung sash replacement (MG-100/200) | $340-$520 |
| Impact-rated sash replacement (MG-Impact) | $580-$780 |
| Complete frame-out and replacement (standard) | $680-$940 |
| Complete frame-out and replacement (impact-rated) | $1,120-$1,480 |
| Balance hardware only (labor + parts) | $180-$260 |
What drives the range: frame condition (whether the rough opening needs remediation), glass specification (clear versus Low-E versus laminated impact), and accessibility (second-story openings require our equipped crew). Every quote includes the sash or frame assembly, new fasteners and sealant, disposal of the old unit, and the documented photo record you receive at completion. The 365-Day Done Right Promise covers the installation and hardware; glass breakage from impact is covered under manufacturer warranty terms.
DIY or Call Us?

There is one thing a West Park homeowner can safely check: verify whether the window is actually unlocked, and whether debris in the track or a painted-shut sash is the real problem. We have arrived to find both.
What goes wrong with DIY on Mr-Glass units: the sash on a modern vinyl window is heavier than it looks, and the balance system is under spring tension that can release abruptly if the pivot bar is not engaged correctly. A dropped sash cracks the glass, and now you’re replacing the IGU too. Second, impact-rated frames use structural fasteners at specific spacing; removing them without the proper sequence compromises the design pressure rating that the original installation certificate documented for your wind mitigation report.
We are not affiliated with Mr-Glass. We are an independent service provider that installs and services their products per manufacturer spec. If you have a failing sash, balance, or frame, call (786) 685-4706 and we will schedule a measured survey. The price we write is the price you pay.
FAQs
Ten to fifteen years for standard vinyl units, and fifteen to twenty for impact-rated laminates, assuming the weep system is cleared annually and the tracks are kept free of grit. The salt-air exposure in West Park accelerates hardware corrosion compared to inland Broward County. Call (786) 685-4706 for an exact assessment of your specific unit.
An IGU seal failure cannot be repaired; the glass unit must be replaced. A cracked single pane can be reglazed in some older aluminum frames, but Mr-Glass vinyl and impact-rated sashes are manufactured as integrated units that are not field-reglazable. We will tell you which applies during the measured survey.
A sash swap takes ninety minutes to two hours per opening; a complete frame-out takes three to four hours, plus cure time for the sealant before the window can be operated. We schedule so you’re not waiting around for us to finish. Call (786) 685-4706 to set the date.
We carry MG-100 and MG-200 balances, pivot bars, and standard sash sizes for the most common West Park configurations. Impact-rated and custom-size sashes are ordered to the measured spec and typically arrive within three to five business days. We do not start work until the part is in hand.
Measure it right, say what it costs, do the work. That’s how we’ve handled every one of the 18,000+ openings since 2012, and it’s how we’ll handle yours.
Written by Sonia Raman, Owner, Sightline Windows & Doors West Park at Sightline Windows & Doors West Park, serving West Park and nearby areas.










Before
After
Before
After
Before
After